We provide hi-tech Hydraulic Sleeper Laying Machine that is manufactured using the latest technologies. The Hydraulic Sleeper Laying Machine that we manufacture is appreciated by the clients for its high efficiency and durability. Sleeper Laying Machine offers excellent performance and is in high demand. We are reckoned to be one of the budding Manufacturers and Suppliers of Hydraulic Sleeper Laying Machine in India.
Grip 20 alternate sleepers from a bunch of 40 sleepers placed on rails centrally between the anxiliary track of 3400mm gauge
Lift twenty sleepers simultaneously
Lock 20 sleepers at 600 CTRS
Transport the lifted, spaced sleepers at optimum speed and lay these at the remote site
The machine will travel on an auxillary track of 3400mm gauge and cross level 0-0, for accurate laying of sleepers
The lifting and carrying arrangement is non-sway type and all operations are executed by the operator hydraulically
construction of new tracks safely and efficiently with minimum workmen
Requirements To Operate The Hydraulic Sleeper Laying Machine
An auxillary track of 3.4 meter gauge is laid matching the centre line of the new track
An unloading base is designated for incoming sleepers on dedicated 40 sleeper trailers
The base should have auxillary track such that the incoming trailers can go within the aux track for unloading by this machine with specially designed beam structure arrangement
The beam structure is used to grip, release, space, anchor and tighten alternate sleepers on to its body
Specially designed hydraulic cylinder and steel wire rope arrangement
The can be dismantled, shifted to new work site and assembled
Each assembly shall can be placed in a lorry (2300 widex6000mm long) and can be transported
Crane not required
Save time and tedious work to operate the machine
Travelling speed(Hyd. Motors)
Lifting Beam SWL
Auxillary Track Gauge
Auxillary Track Cross Level
Max. Working Pressure Lifting
Max. Working Pressure Travel FEW-REV.
Max.system operating Temperature
Oil Tank volume
Fabricated from std.steel sections, Spares-alloy steels, heat treated as per functional loads.
Alloy steel castings heated treated at tread, Wire rope Std. alloy steel (FS-3.5), All rotating parts on roller/ball bearings as per load ratings.
Painting of structures
1st. coat -oil primer, 2 coats of oil paints color yellow.
all fastners shall be high tensile steel /Unbrako/TVS grade 8.8-12.9.
3 lever Hydraulic directional control valve for 1.Lift Cylinder 2.Travel 3.Sleeper gripping.
Diesel Engine-Assembled, Leyland, vertical, water cooled. Warrantly -one year.
Reservoir cross tubes, Air Blast type.
System Pre-set pressure, over load cut off
open type, tubular structure with canvas.
Night working Lights
2 nos FWD, 2nos REV, One central.
one push button controlled.
2 nos exide as per manufacturers warrantly. System -24 Volt DC, 120AH.
Beam structure in six pieces fastened together having sleeper gripping hydraulic cylinders, steel wire rope, pulleys and vertical guide and anti sway roller structure.